Advanced Search
Project List
Basket
  • Home
  • Search results for: 'timco for a'
Filter By
Filter Products
Product Type
  1. Deck Screws 2item
  2. Hammer Fixings 9item
  3. Multi Fix Bolts 9item
  4. Multi Purpose Screws 1 item
  5. Round Wire 5item
  6. Screws 4item
  7. Timber Screw 1 item
  8. Timber Screws 1 item
  9. Coach Bolts 13item
  10. Tower Bolt 8item
  11. Garage Bolt 2item
  12. Fence Post Spikes & Bases 5item
  13. Stainless Steel Screws 7item
  14. Resin Adhesive 5item
  15. Drywall Screws 4item
  16. Concrete Screws 13item
  17. Washers 12item
  18. Roofing Bolts 2item
  19. Nail Gun Nails 11item
  20. Panel Pins 7item
  21. Dot & Dab Fixings 5item
  22. Decking Screws 1 item
  23. Sealant Gun 2item
  24. Hexagon Head Bolts 3item
  25. Tee Hinges 6item
  26. Pull Handle 1 item
  27. Hinges 4item
  28. Cabin Hook 3item
  29. Hasp & Staple 2item
  30. Lost Heads 3item
  31. Masonry 5item
  32. Nuts 7item
  33. Suffolk Latch 1 item
  34. Frame Fixings 9item
  35. Annular Ring Shank 5item
  36. Springhead Roofing 1 item
  37. Wire Brushes 2item
  38. Ovals 3item
  39. Galvanised Round Wire 11item
  40. Clout 8item
  41. Plasterboard Fixings 2item
  42. Universal Plug Fixings 8item
  43. Packers 5item
  44. Padbolt 2item
  45. Cavity Fixings 2item
  46. Resin Fixings 3item
  47. Expanding Fixings 13item
  48. Fixings 3item
  49. Fixing Plugs 11item
  50. Blow Out Pump 1 item
  51. Setting Tool 1 item
  52. Spring Toggle Fixings 2item
  53. Square Twisted 5item
  54. Gate Springs 2item
  55. Threaded Bar 6item
  56. Turn Button 2item
  57. Staples 2item
  58. Speed Plug Fixings 2item
Specification
  1. 0 - 10 bar 0items
  2. 220-240V~50Hz 0items
  3. Battery charging voltage [V] 14.4 – 18 Charge current [A] 8.0 Charg. time at bat. cap. 2.0 Ah (80%/100%) approx. [min] 16/24 Weight [Kg] 1.8 0items
  4. Battery voltage 18 V No-load rotation 8000 – 20000 opm Oscillation angle on left and right 1.4 ° 0items
  5. Battery voltage 18.0 V No-load orbital stroke rate 12,000 – 20,000 opm Orbit diameter 1.6 mm Sanding plate, width80 mm Sanding plate, length130 mm 0items
  6. Battery voltage [V]18 Table size [mm]658 x 553 No-load speed [rpm]4500 Saw blade diameter [mm]216 Cutting height [mm]70 Weight [kg]21.6 Max. cutting capacity on the right [mm]635 0items
  7. Blade Diameter: 165mm. Bore: 20mm. Teeth: 24. Kerf Thickness: 1.8mm. Tooth Config: ATB. 0items
  8. BS 2779 0items
  9. BS 4800, BS 6151 0items
  10. BS 669-1 0items
  11. BS EN 1451-1-2001 0items
  12. BS EN 197-2 0items
  13. BS EN 459 -1 – CL 90-S 0items
  14. BS EN 459-1 CL 90-S 0items
  15. BS EN 9227:2012 2item
  16. Class 1 Wet Scrub Rating ISO 11998. Coverage 10m2 per Litre. Touch Dry 30 minutes. Full Cure7 - 10 days. Recoatable2 hours. 0items
  17. Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
  18. Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
  19. Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
  20. Conforms to EN420 and EN388 0items
  21. Contains 6no 18 x 70 x 2133mm 0items
  22. Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
  23. Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
  24. Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
  25. Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
  26. Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
  27. Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
  28. Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
  29. Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
  30. Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
  31. Cutting depth in wood [mm] 23 Cutting depth in metal profiles and metal pipes [mm] 150 Stroke length in 1st gear [mm] 28 Stroke length in 2nd gear [mm] Weight excl. battery [kg] 3.2 Stroke rate in 1st gear [spm] 2901 0items
  32. Depth of Cut @ 90° 66 mm Blade Diameter 190 mm Depth of Cut @ 45º 46 mm Bore Diameter30 mm Connectable to dust extractor Rear angular guide for smooth and precise adjustment of bevel angle Single action lever for quick adjustment of cutting depth 0items
  33. Diameter: 12.0mm. Total length: 210mm. Working length: 150mm. 0items
  34. Diameter: 5.5mm. Total length: 160mm. Working Length: 100mm. 0items
  35. Diameter: 5.5mm. Total length: 160mm. Working Length: 115mm. 0items
  36. Diameter: 6.0mm. Total length: 210mm. Working length: 150mm. 0items
  37. Diameter: 6.5mm. Total length: 210mm. Working length: 150mm. 0items
  38. Diameter: 7.0mm. Total length: 150mm. Working Length: 115mm. 0items
  39. Diameter: 7.0mm. Total length: 160mm. Working length: 100mm. 0items
  40. Diameter: 7.0mm. Total length: 210mm. Working length: 150mm. 0items
  41. Diameter: 8.0mm. Total length: 210mm. Working length: 150mm. 0items
  42. DIN 571 0items
  43. DIN 933, DIN933 1 item
  44. DIN 934 5item
  45. EN 13279-1:2008 0items
  46. EN 1329-2 0items
  47. EN 14190;EN 520, Type A 0items
  48. EN 149:2001+A1:2009 0items
  49. EN141 0items
  50. EN520 Type A & H2 0items
  51. EN520, Type A 0items
  52. EN520, Type A and F 0items
  53. EN520, Types A and D 0items
  54. GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
  55. GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
  56. GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
  57. GDR 200, No load speed 0-3400, Impact rate 0-4000, Max torque 200Nm. GSB 18V-55, No load speed First gear/second gear 0-460/0-1800, Impact rate 0-27000, Torque Hard/Soft 55/28 0items
  58. GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
  59. GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
  60. GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
  61. Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
  62. Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
  63. Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
  64. Input Power: 300W No Load Spee 0items
  65. Input Power: 300WNo Load Spee 0items
  66. ISO 11998 0items
  67. Length of work bench: 1,044 mm Weight with/without accessories: 34.8 kg Weight: 35 kg Length of work bench with extension: 2,504 mm Height of work bench: 947 mm 0items
  68. Length of work bench: 1578 mm Weight with/without accessories: 22.3 / 18.9 kg Weight: 22 kg Length of work bench with extension: 3877 mm Height of work bench: 824 mm Load bearing capacity, max.: 250 kg 0items
  69. Length: 109mm Diameter 7.0mm Manufactured to DIN 338 standards. 0items
  70. Length: 117mm Diameter 8.0mm Manufactured to DIN 338 standards. 0items
  71. Length: 140 > 310mmLength Closed - 140mmLength Extended - 310mmSize - 4"/110mm 0items
  72. Length: 160mm Diameter 6.0mm Flute: 109mm 0items
  73. Length: 480mm BSEN 10346:2009 0items
  74. Length: 49mm Diameter 2.0mm Manufactured to DIN 338 standards. 0items
  75. Length: 61mm Diameter 3.0mm Manufactured to DIN 338 standards. 0items
  76. Length: 75mm Diameter 4.0mm Manufactured to DIN 338 standards. 0items
  77. Length: 86mm Diameter 5.0mm Manufactured to DIN 338 standards. 0items
  78. Length: 93mm Diameter 6.0mm Manufactured to DIN 338 standards. 0items
  79. Manufactured and tested in accordance with BS EN 771-3: 2011 0items
  80. Manufactured to EN 12413 standard 0items
  81. Max. impact energy [J] 12.5 Impact rate at rated speed [bpm] 1380 – 2760 Rated speed [rpm] 0 – 305 Weight excl. battery [kg] 9.2 0items
  82. Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
  83. Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
  84. Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
  85. No-load speed (rpm) - 3400 Saw blade diameter (mm) - 165 Saw blade bore diameter (mm) - 20 Weight incl. battery (kg) 4.1 Battery voltage (V) 18 Cell technology -Li-Ion Cutting depth (90°) (mm) 57 Cutting depth (45°) (mm) 43 0items
  86. No-load speed [rpm] 11000 Weight excl. battery [kg] 1.6 Equivalent [W] 700 Grinding/cutting disc, diameter [mm] 125 (115) 0items
  87. No-load speed [rpm] 2500 – 5000 Saw blade diameter [mm] 190 Saw blade bore diameter [mm] 30 Weight excl. battery [kg] 4.3 Guide rail compatible yes Max. cutting capacity in wood (90°) [mm] 68 Max. cutting capacity in wood (45°) [mm] 50 0items
  88. No-load speed [rpm] 9000 Weight excl. battery [kg] 2.1 Equivalent [W] 1000 0items
  89. No-load speed: 14000 rpm Cutting depth: 0 – 1.6 mm Rebating depth: 0 – 8 mm Planing width, max.: 82 mm Weight incl. battery: 2.6 kg Battery voltage: 18 V 0items
  90. Radio frequency range FM [MHz] 87.5 – 108 Input voltage(s), battery [V] 18 Station presets 8 Input voltage(s), mains [V] 100 – 240 Output voltage(s), mains [V] 18 Weight excl. battery [kg] 2.3 Rated power of amplifier (in mains operation) [W] 15 0items
  91. Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
  92. Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
  93. Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
  94. Rated power input: 1500 W Max. impact energy: 13 J Impact rate at rated speed: 2720 bpm Weight: 8.5 kg Bit holder: SDS-max 0items
  95. Rated speed [rpm] 0 – 890 Battery voltage [V] 18 Battery capacity [Ah] 6 Weight incl. battery [kg] 3.5 Length [mm] 347 Height [mm] 225 Bit holder SDS-plus 0items
  96. Rated Voltage (V) 12 Motor technology DC Max torque soft/hard (Nm) 15/30 Weight (w/ battery; w/o attachment) (kg) 0.8 GSR only (mm) 132 GSR with GFA att. (chuck) (mm) 178 Chuck (GFA) Chuck capacity (mm) 10 0items
  97. Safe Work Ht 2.59m, 150kg load 0items
  98. Safe Work Ht 6.5m, Rated 150kg 0items
  99. Sanding pad diameter [mm] 125 No-load speed [rpm] 6000 – 10000 Orbital stroke rate [opm] 12000 – 20000 Eccentricity [mm] 1.25 Sanding sheet / disc attachment Hook-and-loop fastening Weight excl. battery [kg] 1.1 Orbit diameter [mm] 2,5 0items
  100. Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
  101. Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
  102. Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
  103. Size 6mm 0items
  104. Stroke rate at no load, up to [spm] 3500 Stroke height [mm] 26 Cutting depth in wood [mm] 125 Cutting depth in aluminium [mm] 20 Cutting depth in unalloyed steel [mm]10 0items
  105. Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
  106. Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
  107. Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
  108. Table size: 584 x 759 mm No-load speed: 3200 rpm Saw blade diameter: 254 mm Saw blade bore diameter: 30 mm Incline setting: 47 ° L / 1 ° R Weight: 35 kg Max. cutting capacity on the right: 635 mm Max. cutting capacity on the left: 250 mm 0items
  109. To BS 5440 Part 2, 2000 0items
  110. Tool dimensions (length) [mm] 1400 0items
  111. Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
  112. Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
  113. Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
  114. Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
  115. Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
  116. Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
  117. Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
  118. Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
  119. Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
  120. Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
  121. Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
  122. Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
  123. Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
  124. Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
  125. Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
  126. Weight: 55.5 kg 0items
  127. EN 12004 0items
  128. Weight: 6.6kg 0items
  129. Weight: 16.5kg 0items
  130. Weight: 33kg 0items
  131. BS EN 1254 0items
  132. Wing length: 56mm 0items
  133. Wing length: 65mm 0items
  134. Wing length: 44mm 0items
  135. Wing length: 57mm 0items
  136. Wing length: 58mm 0items
  137. Wing length: 64mm 0items
  138. Wing length: 30mm 0items
  139. Wing length: 45mm 0items
  140. EN204, BS 14256 0items
  141. BS1212 Part 3 0items
  142. BS 6150 0items
  143. DIN 603, DIN 934 13item
  144. BS ΕΝ 1057 0items
  145. EN1254 0items
  146. EN204 0items
  147. Max Load 85L, Plate 560mm W 0items
  148. BS 476 0items
  149. BS 6150, BS 8000 0items
  150. Material Stone Wool 0items
  151. EN934-3 (2009) +A1 (2012) 0items
  152. BS EN 9227 4item
  153. 1/4" BSP connections 0items
  154. Head Rotation: 360deg 0items
  155. Weight 1.8 kg, Output 720 W 0items
  156. EN 1433:2002 0items
  157. For use with all 25mm bits 0items
  158. BS 6150, EN 942: 1996 0items
  159. B2 DIN 4102 0items
  160. Contains 5no 18 x 70 x 2133mm 0items
  161. Wt: 9.68 Kg, ISO14592:2008 1 item
  162. EN420:1994 & EN388:1994 0items
  163. EN420:1994 & EN388:1995 0items
  164. EN420:1994 & EN388:1996 0items
  165. EN420:1994 & EN388:1997 0items
  166. EN420:1994 & EN388:1992 0items
  167. EN420:1994 & EN388:1993 0items
  168. EN 442 0items
  169. DIN 933, DIN934 1 item
  170. EN 14800 0items
  171. BS 669 0items
  172. BS 4800, BS 6150 0items
  173. Hot Dip Galvanised 0items
  174. CE Mark & Certifire compliant 0items
  175. BS 4800 0items
  176. DIN 125 5item
  177. BS EN845-2:2013+A1:2016 0items
  178. EN 13813 CT-C25-F6 0items
  179. Safe Work Ht 2.58m, 150kg load 0items
  180. Open Height 0.5m, Rated 150kg 0items
  181. BS EN14975 0items
  182. Product Weight: 2.26kg 0items
  183. Weight Capacity: 150kg 0items
  184. Tested to the BS EN1303:2005 0items
  185. BBA Approved 0items
  186. BS EN 10346: 2009 0items
  187. DIN 982 2item
  188. BSEN 204 0items
  189. Volume: 50g / 200ml 0items
  190. Mesh Size 200x200x6mm 0items
  191. Mesh Size 200x200x10mm 0items
  192. Grade: T12, Diameter; 12 mm 0items
  193. Wt 26kg, BS EN 520 Type H1 0items
  194. Wt 30kg, BS EN 520 Types D,F 0items
  195. Wt 23kg, BS EN 520 Types D,F 0items
  196. EN197 0items
  197. DIN 9054 5item
  198. BS 6920 0items
  199. Stainless steel blade 0items
  200. Material: Plastic 0items
  201. BS-3621, CE marked 0items
  202. BS 6572/BS 6730 0items
  203. BS6515 0items
  204. EN 12050-3 0items
  205. WRAS, TMV2 0items
  206. EN15651-1: 0items
  207. EN15651 0items
  208. EN 1329-1 0items
  209. WRAS 0items
  210. 4 size pack 0items
  211. EN1329 0items
  212. EN 1213 0items
  213. BS476 Part 22: 1987. 0items
  214. BS EN 1329-1 0items
  215. Certified to EN14604:2005 0items
  216. Burn: 20 seconds 0items
  217. 100% Natural Cellulose 0items
  218. Size: 1.5 to 6 mm 0items
  219. ISO22196:2007, ISO11600-F-20LM 0items
  220. BS 1010 0items
  221. Thickness: 0.46mm 0items
  222. BS876 0items
  223. Length: 145mm 0items
  224. External Size 85 x 118 x 36mm 0items
  225. Blade Width: 19 mm 0items
  226. DIN 975 6item
  227. ISO 11600-F&G-20LM 0items
  228. ISO 11600-F&G-25LM 0items
  229. Pressure: 0-4 Bar 0items
  230. EN 12205 0items
  231. Grade: Medium 0items
  232. BS2782 0items
  233. BS EN 1451-1:2000 0items
  234. Size: 1.5 to 10 mm 0items
  235. BS EN 331:1998 0items
  236. Elongation MD: 65%, TD: 70% 0items
  237. WRAS, TRV3 0items
  238. BS EN 248 0items
  239. EN 1455 0items
  240. WRAS Approved 0items
  241. WRAS, TMV2, TMV3 0items
  242. EN215 0items
  243. EN14351-1 0items
  244. Material: Stainless steel 0items
  245. Conforms to EN471 Class 2 0items
  246. BS 2879 0items
  247. BS 4800, ISO 11998 0items
  248. BS EN 331:1998+A1:2010 0items
  249. BSEN1504 0items
  250. Wheel Size 15x6x1.5mm 0items
  251. Bore Size 22.23mm > 16mm 0items
  252. Wing length: 25mm 0items
Colour
  1. Black 13item
  2. Red 2item
  3. Grey 1 item
  4. Galvanised 10item
  5. Brown 2item
  6. Yellow 1 item
  7. Green 1 item
  8. Zinc 5item
Size
  1. 10 x 1000mm 1 item
  2. 10 x 100mm 1 item
  3. 10 x 120mm 3item
  4. 10 x 125mm 1 item
  5. 10 x 130mm 1 item
  6. 10 x 140mm 2item
  7. 10 x 150mm 4item
  8. 10 x 160mm 2item
  9. 10 x 180mm 2item
  10. 10 x 40mm 1 item
  11. 10 x 75mm 1 item
  12. 100 x 4.5mm 2item
  13. 100 x 4.5mm 1kg 1 item
  14. 12 x 1000mm 1 item
  15. 12 x 100mm 1 item
  16. 12 x 125mm 1 item
  17. 12 x 130mm 2item
  18. 12 x 150mm 2item
  19. 12 x 50mm 1 item
  20. 125 x 5.6mm 1kg 1 item
  21. 150 x 6mm 1kg 1 item
  22. 16 x 1000mm 1 item
  23. 16 x 125mm 1 item
  24. 16 x 190mm 1 item
  25. 2.5 x 25mm 1 item
  26. 2.5 x 30mm 1 item
  27. 2.5 x 35mm 1 item
  28. 20 x 1000mm 1 item
  29. 20 x 3mm 1 item
  30. 25 x 2.65mm 1 item
  31. 25 x 3mm 1 item
  32. 3 x 60mm 1 item
  33. 30 x 1.6mm 2item
  34. 30 x 2.36mm 1 item
  35. 30 x 3.75mm 3item
  36. 30 x 3mm 1 item
  37. 40 x 1.6mm 2item
  38. 40 x 2.65mm 1 item
  39. 40 x 2.65mm 1kg 2item
  40. 40 x 2.65mm 2.5kg 1 item
  41. 40 x 3.75mm 1kg 1 item
  42. 40 x 4mm 1 item
  43. 4x25mm 1 item
  44. 4x30mm 1 item
  45. 4x70mm 1 item
  46. 5 x 52mm 2item
  47. 5 x 75mm 1 item
  48. 50 x 2.65mm 2item
  49. 50 x 2.65mm 1kg 2item
  50. 50 x 2.65mm 2.5kg 1 item
  51. 50 x 2mm 2item
  52. 50 x 3mm 1 item
  53. 50x2.65mm 1 item
  54. 5x100mm 1 item
  55. 5x50mm 1 item
  56. 5x70mm 1 item
  57. 5x80mm 1 item
  58. 6 x 40mm 4item
  59. 6 x 50mm 1 item
  60. 6 x 50mm/M8 1 item
  61. 6.7 X 125 1 item
  62. 6.7 x 200mm 1 item
  63. 6.7 X 87 1 item
  64. 6.7x100mm 1 item
  65. 6.7x75mm 1 item
  66. 65 x 2.65mm 1 item
  67. 65 x 2.65mm 2.5kg 1 item
  68. 65 x 3.35mm 2item
  69. 7.5 x 100mm 3item
  70. 7.5 x 180mm 1 item
  71. 7.5 x 200mm 1 item
  72. 7.5x120mm 1 item
  73. 75 x 3.75mm 1kg 1 item
  74. 75 x 3.75mm 2.5kg 1 item
  75. 8 x 1000mm 1 item
  76. 8 x 125mm 1 item
  77. 8 x 40mm 2item
  78. 8 x 60mm 1 item
  79. 8 x 75mm 2item
  80. 8 x 80mm 1 item
  81. 8x110mm 1 item
  82. 8x20mm 1 item
  83. 8 x 100mm 6item
  84. 75mm 1 item
  85. 100mm 1 item
  86. 4 x 50mm 1 item
  87. 25mm 1 item
  88. 13mm 1 item
  89. 6mm 4item
  90. 8mm 5item
  91. 10mm 4item
  92. 12mm 4item
  93. 20mm 1 item
  94. 5 x 50mm 2item
  95. 5 x 60mm 1 item
  96. 5 x 70mm 2item
  97. 7.5 x 80mm 3item
  98. 40mm 1 item
  99. 6 x 25mm 1 item
  100. 2.8 x 50mm 2item
  101. 2.8 x 63mm 1 item
  102. 3.1 x 75mm 1 item
  103. 65mm 1 item
  104. 8 x 25mm 2item
  105. 35mm 1 item
  106. 6 x 125mm 1 item
  107. 40 x 2.36mm 2item
  108. 3 x 50mm 1 item
  109. 205 x 45mm 1 item
  110. 25 x 2mm 1 item
  111. 65 x 3.35mm 1kg 1 item
  112. 65 x 2.65mm 1kg 1 item
  113. 30 x 2.65mm 1 item
  114. 13 x 3mm 1 item
  115. 16mm 1 item
  116. 5 x 55mm 2item
  117. 5 x 65mm 2item
  118. 5 x 80mm 2item
  119. 25 x 1.6mm 1 item
  120. 1 - 6mm 2item
  121. 100 x 28 x 1mm 1 item
  122. 100 x 28 x 3mm 1 item
  123. 100 x 28 x 5mm 1 item
  124. 75 x 600mm 1 item
  125. 30mm 1 item
  126. 5 x 37mm 1 item
  127. 5 x 90mm 2item
  128. 10 x 50mm 2item
  129. 75 x 750mm 1 item
  130. 100 x 750mm 1 item
  131. 12 x 160mm 1 item
  132. 4 x 30mm 1 item
  133. 7.5 x 120mm 2item
  134. 7.5 x 150mm 2item
  135. 6 x 30mm 2item
  136. 3.5 x 35mm 1 item
  137. 3.5 x 50mm 1 item
  138. 3.5 x 32mm 1 item
  139. 6 x 60mm 3item
  140. 40 x 3.75mm 2.5kg 1 item
  141. 3.5 x 45mm 1 item
  142. 6 x 1000mm 1 item
  143. 6 x 80mm 3item
  144. 34mm 1 item
  145. 31.5mm 2item
Diameter
  1. 15mm 1 item
  2. 8mm 19item
  3. 10mm 22item
  4. 16mm 3item
  5. 6mm 17item
  6. 12mm 9item
  7. 4mm 4item
  8. 13mm 1 item
  9. 5mm 8item
  10. 7.5mm 3item
  11. 20mm 2item
  12. 3mm 4item
  13. 2.65mm 4item
  14. 2.8mm 1 item
  15. 3.5mm 5item
  16. 6.7mm 1 item
My Project List"
Last Added Items
  1. Add to Basket
    Remove This Item
Go to Wish List
You have no items in your wish list.

Search results for: 'timco for a'

per page
Page

Items 1-36 of 4253

Did you mean
time for a
timer for a
Related search terms
form
for wall
for wood
for white
for a fr
per page
Page

Items 1-36 of 4253