Filter Products

0 - 10 bar 0items
220-240V~50Hz 0items
Battery charging voltage [V] 14.4 – 18 Charge current [A] 8.0 Charg. time at bat. cap. 2.0 Ah (80%/100%) approx. [min] 16/24 Weight [Kg] 1.8 0items
Battery voltage 18 V No-load rotation 8000 – 20000 opm Oscillation angle on left and right 1.4 ° 0items
Battery voltage 18.0 V No-load orbital stroke rate 12,000 – 20,000 opm Orbit diameter 1.6 mm Sanding plate, width80 mm Sanding plate, length130 mm 0items
Battery voltage [V]18 Table size [mm]658 x 553 No-load speed [rpm]4500 Saw blade diameter [mm]216 Cutting height [mm]70 Weight [kg]21.6 Max. cutting capacity on the right [mm]635 1 item
Blade Diameter: 165mm. Bore: 20mm. Teeth: 24. Kerf Thickness: 1.8mm. Tooth Config: ATB. 0items
BS 2779 0items
BS 4800, BS 6151 0items
BS 669-1 0items
BS EN 1451-1-2001 0items
BS EN 197-2 0items
BS EN 459 -1 – CL 90-S 0items
BS EN 459-1 CL 90-S 0items
BS EN 9227:2012 0items
Class 1 Wet Scrub Rating ISO 11998. Coverage 10m2 per Litre. Touch Dry 30 minutes. Full Cure7 - 10 days. Recoatable2 hours. 0items
Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
Collation angle [°] 20 Nail diameter [mm] .6 Nail length, from [mm] 32 Nail length, up to [mm] 64 Nail type Protected attribute - will be filled automatically Triggering system Protected attribute - will be filled automatically Weight excl. battery [kg] 2 0items
Conforms to EN420 and EN388 0items
Contains 6no 18 x 70 x 2133mm 0items
Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
Cutting capacity 0° with spacer (max. vertical) [mm] 120 x 250 Cutting capacity 0° with spacer (max.horizontal) [mm] 45 x 400 Cutting capacity, 45° mitre [mm] 60 x 240 Cutting capacity, 45° bevel [mm] 40 x 341 Mitre setting 52 ° L / 60 ° R Bevel setting 4 0items
Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
Cutting capacity, 0° [mm] 70 x 270 Cutting capacity, 45° mitre [mm] 70 x 190 Cutting capacity, 45° incline [mm] 45 x 270 Mitre setting 47 ° L / 47 ° R Bevel setting 45 ° L / 0 ° R No-load speed [rpm] 4600 Saw blade diameter [mm] 216 Weight [kg] 14.7 Batt 0items
Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
Cutting capacity, 0°: 70 x 312 mm Cutting capacity, 45° mitre: 70 x 214 mm Cutting capacity, 45° incline: 48 x 312 mm Mitre setting: 52 ° L / 60 ° R Incline setting: 47 ° L / 2 ° R Depth x length x height: 91 x 46 x 41 cm No-load speed: 5500 rpm Saw bla 0items
Cutting depth in wood [mm] 23 Cutting depth in metal profiles and metal pipes [mm] 150 Stroke length in 1st gear [mm] 28 Stroke length in 2nd gear [mm] Weight excl. battery [kg] 3.2 Stroke rate in 1st gear [spm] 2901 0items
Depth of Cut @ 90° 66 mm Blade Diameter 190 mm Depth of Cut @ 45º 46 mm Bore Diameter30 mm Connectable to dust extractor Rear angular guide for smooth and precise adjustment of bevel angle Single action lever for quick adjustment of cutting depth 0items
Diameter: 12.0mm. Total length: 210mm. Working length: 150mm. 0items
Diameter: 5.5mm. Total length: 160mm. Working Length: 100mm. 0items
Diameter: 5.5mm. Total length: 160mm. Working Length: 115mm. 0items
Diameter: 6.0mm. Total length: 210mm. Working length: 150mm. 0items
Diameter: 6.5mm. Total length: 210mm. Working length: 150mm. 0items
Diameter: 7.0mm. Total length: 150mm. Working Length: 115mm. 0items
Diameter: 7.0mm. Total length: 160mm. Working length: 100mm. 0items
Diameter: 7.0mm. Total length: 210mm. Working length: 150mm. 0items
Diameter: 8.0mm. Total length: 210mm. Working length: 150mm. 0items
DIN 571 0items
DIN 933, DIN933 0items
DIN 934 0items
EN 13279-1:2008 0items
EN 1329-2 0items
EN 14190;EN 520, Type A 0items
EN 149:2001+A1:2009 0items
EN141 0items
EN520 Type A & H2 0items
EN520, Type A 0items
EN520, Type A and F 0items
EN520, Types A and D 0items
GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
GDR 18V-210 C- Torque adjustment range, min./max., 1st level 0/80 Nm, Torque adjustment range, min./max., 2nd level, 0/160 Nm, Torque adjustment range, min./max., 3rd level 0/210 Nm, No-load speed* 0 rpm, No-load speed (1st level)* 0 rpm, No-load speed (2 0items
GDR 200, No load speed 0-3400, Impact rate 0-4000, Max torque 200Nm. GSB 18V-55, No load speed First gear/second gear 0-460/0-1800, Impact rate 0-27000, Torque Hard/Soft 55/28 0items
GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
GSB 12V-15: Torque, max. (hard/soft): 30 / 15 Nm No-load speed (1st gear / 2nd gear): 0 – 380 / 0 – 1300 rpm Max. impact rate: 19500 bpm Chuck capacity, min./max.: 1 / 10 mm Drill spindle thread: 1/2" Battery voltage: 10.8 V Battery capacity: 2.0 Ah Weig 0items
Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
Impact rate at rated speed [bpm] 0 – 5100 Rated speed [rpm] 0 – 1800 Weight excl. battery [kg] 2.4 Drilling dia. in concrete with hammer drill bits [mm] 4 – 20 Opt. app. range in concrete with hammer drill bits [mm] 6 – 10 Max. drilling diameter in metal 0items
Input Power: 300W No Load Spee 0items
Input Power: 300WNo Load Spee 0items
ISO 11998 0items
Length of work bench: 1,044 mm Weight with/without accessories: 34.8 kg Weight: 35 kg Length of work bench with extension: 2,504 mm Height of work bench: 947 mm 0items
Length of work bench: 1578 mm Weight with/without accessories: 22.3 / 18.9 kg Weight: 22 kg Length of work bench with extension: 3877 mm Height of work bench: 824 mm Load bearing capacity, max.: 250 kg 0items
Length: 109mm Diameter 7.0mm Manufactured to DIN 338 standards. 0items
Length: 117mm Diameter 8.0mm Manufactured to DIN 338 standards. 0items
Length: 140 > 310mmLength Closed - 140mmLength Extended - 310mmSize - 4"/110mm 0items
Length: 160mm Diameter 6.0mm Flute: 109mm 0items
Length: 480mm BSEN 10346:2009 0items
Length: 49mm Diameter 2.0mm Manufactured to DIN 338 standards. 0items
Length: 61mm Diameter 3.0mm Manufactured to DIN 338 standards. 0items
Length: 75mm Diameter 4.0mm Manufactured to DIN 338 standards. 0items
Length: 86mm Diameter 5.0mm Manufactured to DIN 338 standards. 0items
Length: 93mm Diameter 6.0mm Manufactured to DIN 338 standards. 0items
Manufactured and tested in accordance with BS EN 771-3: 2011 0items
Manufactured to EN 12413 standard 0items
Max. impact energy [J] 12.5 Impact rate at rated speed [bpm] 1380 – 2760 Rated speed [rpm] 0 – 305 Weight excl. battery [kg] 9.2 0items
Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
Max. power input (Turbine): 1.380 W Weight: 12,4 kg Container volume, gross: 35 L Container volume, net: 23 L Container volume, net, water: 19.2 L Dust class of wet/dry extractor: M Dust class of main filter: M Filter surface area: 6150 cm² Max. volume 0items
No-load speed (rpm) - 3400 Saw blade diameter (mm) - 165 Saw blade bore diameter (mm) - 20 Weight incl. battery (kg) 4.1 Battery voltage (V) 18 Cell technology -Li-Ion Cutting depth (90°) (mm) 57 Cutting depth (45°) (mm) 43 0items
No-load speed [rpm] 11000 Weight excl. battery [kg] 1.6 Equivalent [W] 700 Grinding/cutting disc, diameter [mm] 125 (115) 0items
No-load speed [rpm] 2500 – 5000 Saw blade diameter [mm] 190 Saw blade bore diameter [mm] 30 Weight excl. battery [kg] 4.3 Guide rail compatible yes Max. cutting capacity in wood (90°) [mm] 68 Max. cutting capacity in wood (45°) [mm] 50 0items
No-load speed [rpm] 9000 Weight excl. battery [kg] 2.1 Equivalent [W] 1000 0items
No-load speed: 14000 rpm Cutting depth: 0 – 1.6 mm Rebating depth: 0 – 8 mm Planing width, max.: 82 mm Weight incl. battery: 2.6 kg Battery voltage: 18 V 0items
Radio frequency range FM [MHz] 87.5 – 108 Input voltage(s), battery [V] 18 Station presets 8 Input voltage(s), mains [V] 100 – 240 Output voltage(s), mains [V] 18 Weight excl. battery [kg] 2.3 Rated power of amplifier (in mains operation) [W] 15 0items
Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
Rated power input: 1150 W Max. impact energy: 8.8 J Impact rate at rated speed: 1500 – 3050 bpm Rated speed: 170 – 340 rpm Bit holder: SDS-max Drilling diameter in concrete with hammer drill bits: 12 – 40 mm Optimum range of applications in concrete with 0items
Rated power input: 1500 W Max. impact energy: 13 J Impact rate at rated speed: 2720 bpm Weight: 8.5 kg Bit holder: SDS-max 0items
Rated speed [rpm] 0 – 890 Battery voltage [V] 18 Battery capacity [Ah] 6 Weight incl. battery [kg] 3.5 Length [mm] 347 Height [mm] 225 Bit holder SDS-plus 0items
Rated Voltage (V) 12 Motor technology DC Max torque soft/hard (Nm) 15/30 Weight (w/ battery; w/o attachment) (kg) 0.8 GSR only (mm) 132 GSR with GFA att. (chuck) (mm) 178 Chuck (GFA) Chuck capacity (mm) 10 0items
Safe Work Ht 2.59m, 150kg load 0items
Safe Work Ht 6.5m, Rated 150kg 0items
Sanding pad diameter [mm] 125 No-load speed [rpm] 6000 – 10000 Orbital stroke rate [opm] 12000 – 20000 Eccentricity [mm] 1.25 Sanding sheet / disc attachment Hook-and-loop fastening Weight excl. battery [kg] 1.1 Orbit diameter [mm] 2,5 0items
Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
Saw blade diameter [mm] 140 Baseplate [mm] 305 x 169 Bevel angle [°] -1 - 47 Cutting depth without guide rail (90°) [mm] 52 Cutting depth with guide rail (90°) [mm] 46 Cutting depth without guide rail (45°)[mm] 32 Cutting depth with guide rail (45°) [mm] 0items
Size 6mm 0items
Stroke rate at no load, up to [spm] 3500 Stroke height [mm] 26 Cutting depth in wood [mm] 125 Cutting depth in aluminium [mm] 20 Cutting depth in unalloyed steel [mm]10 0items
Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
Table size [mm] 642 x 634 No-load speed [rpm] 3650 Saw blade diameter [mm] 254 Cutting height 90° [mm] 79 Saw blade bore diameter [mm] 30 Incline setting 47 ° L / 2 ° R Weight [kg] 27 Max. cutting capacity on the right [mm] 635 Max. cutting capacity on th 0items
Table size: 584 x 759 mm No-load speed: 3200 rpm Saw blade diameter: 254 mm Saw blade bore diameter: 30 mm Incline setting: 47 ° L / 1 ° R Weight: 35 kg Max. cutting capacity on the right: 635 mm Max. cutting capacity on the left: 250 mm 0items
To BS 5440 Part 2, 2000 0items
Tool dimensions (length) [mm] 1400 0items
Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
Torque (soft) [Nm] 21 Torque (hard) [Nm] 45 No-load speed, 1st gear, from [rpm] No-load speed, 1st gear, up to [rpm] 500 No-load speed, 2nd gear, from [rpm] 0 No-load speed, 2nd gear, up to [rpm] 1900 Battery type Lithium-ion Max. impact rate [bpm] 27000 0items
Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
Torque (soft/hard/max.) 36/64/- Nm No-load speed (1st gear / 2nd gear) 0 – 630 / 0 – 2,100 rpm Chuck capacity, min./max. 1.5 / 13 mm Battery voltage 18.0 V Weight excl. battery 1.2 kg Torque settings 21 Max. screw diameter 12 mm Drilling diameter Max. dri 0items
Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
Torque (soft/hard/max.) [Nm] 84/100/150 No-load speed (1st gear / 2nd gear) [rpm] 0 – 550 / 0 – 2200 Battery type Lithium-ion Max. impact rate [bpm] 30 Chuck capacity, min./max. [mm] 1.5 / 13 Weight excl. battery [kg] 2.2 Torque settings 25+2 Max. drillin 0items
Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
Torque adjustment range, min./max., 1st level [Nm] 0/130 Torque adjustment range, min./max., 2nd level [Nm] 0/160 Torque adjustment range, min./max., 3rd level [Nm] 0/210 No-load speed [rpm] 0-3400 Weight excl. battery [kg] 1.2 Torque, max. [Nm] 210 Impac 0items
Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
Weight excl. battery [kg] 4.7 Suction hose nominal width [mm] 35 Filter surface area [cm²] 2375 Max. airflow rate (turbine) [l/sec] 24 Max. vacuum pressure (turbine) [mbar] 90 Container volume, gross [l] 10 Container volume, net [l] 6 Container volume, ne 0items
Weight: 55.5 kg 0items
EN 12004 0items
Weight: 6.6kg 0items
Weight: 16.5kg 0items
Weight: 33kg 0items
BS EN 1254 0items
Wing length: 56mm 0items
Wing length: 65mm 0items
Wing length: 44mm 0items
Wing length: 57mm 0items
Wing length: 58mm 0items
Wing length: 64mm 0items
Wing length: 30mm 0items
Wing length: 45mm 0items
EN204, BS 14256 0items
BS1212 Part 3 0items
BS 6150 0items
DIN 603, DIN 934 0items
BS ΕΝ 1057 0items
EN1254 0items
EN204 0items
Max Load 85L, Plate 560mm W 0items
BS 476 0items
BS 6150, BS 8000 0items
Material Stone Wool 0items
EN934-3 (2009) +A1 (2012) 0items
BS EN 9227 0items
1/4" BSP connections 0items
Head Rotation: 360deg 0items
Weight 1.8 kg, Output 720 W 0items
EN 1433:2002 0items
For use with all 25mm bits 0items
BS 6150, EN 942: 1996 0items
B2 DIN 4102 0items
Contains 5no 18 x 70 x 2133mm 0items
Wt: 9.68 Kg, ISO14592:2008 0items
EN420:1994 & EN388:1994 0items
EN420:1994 & EN388:1995 0items
EN420:1994 & EN388:1996 0items
EN420:1994 & EN388:1997 0items
EN420:1994 & EN388:1992 0items
EN420:1994 & EN388:1993 0items
EN 442 0items
DIN 933, DIN934 0items
EN 14800 0items
BS 669 0items
BS 4800, BS 6150 0items
Hot Dip Galvanised 0items
CE Mark & Certifire compliant 0items
BS 4800 0items
DIN 125 0items
BS EN845-2:2013+A1:2016 0items
EN 13813 CT-C25-F6 0items
Safe Work Ht 2.58m, 150kg load 0items
Open Height 0.5m, Rated 150kg 0items
BS EN14975 0items
Product Weight: 2.26kg 0items
Weight Capacity: 150kg 0items
Tested to the BS EN1303:2005 0items
BBA Approved 0items
BS EN 10346: 2009 0items
DIN 982 0items
BSEN 204 0items
Volume: 50g / 200ml 0items
Mesh Size 200x200x6mm 0items
Mesh Size 200x200x10mm 0items
Grade: T12, Diameter; 12 mm 0items
Wt 26kg, BS EN 520 Type H1 0items
Wt 30kg, BS EN 520 Types D,F 0items
Wt 23kg, BS EN 520 Types D,F 0items
EN197 0items
DIN 9054 0items
BS 6920 0items
Stainless steel blade 0items
Material: Plastic 0items
BS-3621, CE marked 0items
BS 6572/BS 6730 0items
BS6515 0items
EN 12050-3 0items
WRAS, TMV2 0items
EN15651-1: 0items
EN15651 0items
EN 1329-1 0items
WRAS 0items
4 size pack 0items
EN1329 0items
EN 1213 0items
BS476 Part 22: 1987. 0items
BS EN 1329-1 0items
Certified to EN14604:2005 0items
Burn: 20 seconds 0items
100% Natural Cellulose 0items
Size: 1.5 to 6 mm 0items
ISO22196:2007, ISO11600-F-20LM 0items
BS 1010 0items
Thickness: 0.46mm 0items
BS876 0items
Length: 145mm 0items
External Size 85 x 118 x 36mm 0items
Blade Width: 19 mm 0items
DIN 975 0items
ISO 11600-F&G-20LM 0items
ISO 11600-F&G-25LM 0items
Pressure: 0-4 Bar 0items
EN 12205 0items
Grade: Medium 0items
BS2782 0items
BS EN 1451-1:2000 0items
Size: 1.5 to 10 mm 0items
BS EN 331:1998 0items
Elongation MD: 65%, TD: 70% 0items
WRAS, TRV3 0items
BS EN 248 0items
EN 1455 0items
WRAS Approved 0items
WRAS, TMV2, TMV3 0items
EN215 0items
EN14351-1 0items
Material: Stainless steel 0items
Conforms to EN471 Class 2 0items
BS 2879 0items
BS 4800, ISO 11998 0items
BS EN 331:1998+A1:2010 0items
BSEN1504 0items
Wheel Size 15x6x1.5mm 0items
Bore Size 22.23mm > 16mm 0items
Wing length: 25mm 0items

My Project List"

Last Added Items

You have no items in your wish list.

Search results for: 'board fence panel'

Your search request 'code board timber fence panel' did not match any products.
Showing results using some of your search terms '~~code~~ board ~~timber~~ fence panel '

Products

Did you mean: board fence pine; board fence plane

Related search terms: Board; board b g; board g; board taxabl; board ed